Lynnwood Honda is a Edmonds Honda dealer and a new car and used car Edmonds WA Honda dealership.
Honda Marine Outboard Motors

Honda Marine’s reliable, durable engines are quiet, economical, convenient to operate, & powerful!

At Honda, we believe our warranty is the best in the industry.
Independent experts agree. Honda’s three-year, limited factory non-declining warranty was selected “best overall warranty” by both Bass and Walleye and Trailer Boat magazines.  As a pioneer in 4-stroke engine technology, Honda Marine has a long list of innovations to its credit.

Portable HP - Honda offers an excellent selection of light, powerful 'portable engines' for use on canoes, inflatables, sailboats, and small fishing boats. These include the BF2HP, BF5HP, BF8/9.9HP and BF15/20HP.

Mid-Range HP - Our powerful, smooth-running mid-range horsepower engines are designed to give you the ultimate performance, convenience, and operating efficiency on pontoons, light fishing boats, bay boats, and inflatables. These include BF25/30HP, BF40/50HP and BF75/90HP.

High HP - Honda’s high-horsepower engines give you the ultimate in power, fuel efficiency and durability. These include BF115/130HP and BF200/225HP.

Lynnwood Honda offers Honda Marine Outboard Motors

Have a question?  Contact the Lynnwood Honda Power Equipment Team at 800-562-1378, or E-mail us for more information.

BF2HP

SPECIFICATIONS
ENGINE - BF2HP
Type: 4-stroke OHV 1 Cylinder/2 Valves
Displacement: 57 cc (3.4 cubic inches)
Bore & Stroke: 45 mm x 36 mm (1.8 x 1.4 inches)
Full Throttle RPM Range: 5,000-6,000 RPM
Rated Power: 2 HP @ 5,500 RPM
Cooling System: Forced air
Fuel Delivery: 1 Carburetor
Ignition System: Transistorized Pointless
Starting System: Recoil
Exhaust: Under water, above propeller
DRIVE
Gear Ratio: 2.40:1
Gear Shift: 360? pivot
EQUIPMENT
Propeller:
3-Blade Plastic
Diameter x Pitch 7-1/4 X 4-3/4 inches
DIMENSIONS
Overall Width: 255 mm/10 inches
Recommended Transom Height:  
(S-type): 381 mm/15 inches
(L-type): 507 mm/20 inches
Dry Weight  
(S-type): 12.2 kg/27 lbs.
(L-type): 12.7 kg/28 lbs.

Honda BF2HP

Lightest 2HP 4-stroke
Only 4-stroke in its class, lighter than most 2-strokes.

Centrifugal Clutch
Models available with centrifugal clutch that is able to maintain a smooth idle and then, when the throttle is advanced, automatically engage the prop above idle speed. It’s like having a neutral position.

Transistor Ignition
Maintenance-free, high-energy output for quick and easy starts.

Forced Air Cooled Engine
No water pump to worry about being plugged with weeds or damaged by sand. Runs in the shallows!

360° Swivel Steering
Provides excellent maneuverability in tight areas. More reverse thrust!

B5HP

SPECIFICATIONS
ENGINE - BF5HP
Type: 4-stroke SOHV 1 Cylinder/2 Valves
Displacement: 127 cc (7.8 cubic inches)
Bore & Stroke: 60 mm x 45 mm (2.4 x 1.8 inches)
Full Throttle RPM Range: 4,500-5,000 RPM
Rated Power: 5 HP @ 4,500 RPM
Cooling System: Water Cooled
Fuel Delivery: 1 Carburetor
Ignition System: Transistorized pointless
Starting System: Recoil
Exhaust: Under Water, Above Propeller
DRIVE
Gear Ratio:
2.08:1
Gear Shift: F-N-R
EQUIPMENT
Alternator (Electric): Optional 3 Amp (38 watt)
Propeller: 3-Blade Aluminum
Diameter x Pitch
7-7/8 X 7-1/2 inches
DIMENSIONS
Overall Width:
340 mm/13.5 inches
Recommended Transom Height  
(S-type) 381 mm/15 inches
(L-type): 507 mm/20 inches
Dry Weight  
(S-type): 27 kg/60 lbs.
(L-type): 27.5 kg/61 lbs.

Honda B5HP
Lightweight/Compact Design
Easy to transport; perfect for small tenders and canoes.

Large Displacement Engine
Water-cooled, single-cylinder design for better low-to-mid-range power.

Low Oil Warning System
Standard warning system protects the engine from severe damage during a low engine oil situation.

Shallow Water Drive
Allows you to run in shallow water and greatly reduces the risk of engine damage.

Positive Lubrication
A crankshaft-driven, automotive style trochoid oil pump ensures critical engine component long-term durability.
BF8/9.9HP

SPECIFICATIONS
ENGINE - BF8/9.9 HP
Type: 4-stroke SOHC 2 Cylinders/4 Valves
Displacement: 222 cc (13.5 cubic inches)
Bore & Stroke: 58 mm x 42 mm (2.3 x 1.6 inches)
Full Throttle RPM Range: (BF8) 4,500-5,500 RPM
(BF9.9) 5,000-6,000 RPM
Rated Power: 8 HP @ 5,000 RPM
9.9 HP @ 5,500 RPM
Cooling System: Water Cooled
Fuel Delivery: 1 Carburetor
Ignition System: PGM-IG
Starting System: Electric/Recoil
Exhaust: Through Hub
DRIVE
Gear Ratio: 2.33:1
Gear Shift: F-N-R
EQUIPMENT
Alternator (Electric): 12-Amp (151 watt)
Alternator: w/voltage regulator (Manual): 6-Amp (76 watt)
Propeller: 4-Blade Aluminum
Diameter x Pitch  
(Standard): 9-1/4 X 8 inches
(Powerthrust): 10 X 6.5 inches
Oil Pressure Alert: Standard
Overheat Alert: Standard
Rev-Limiter:
Standard
DIMENSIONS
Overall Width: 345 mm/13.6 inches
Recommended Transom Height  
(S-type) 381 mm/15 inches
(L-type): 507 mm/20 inches
(X-type): 635 mm/25 inches
Dry Weight  
(S-type): 42 kg/92 lbs.
(L-type): 44 kg/98 lbs.
(X-type): 48 kg/107 lbs.

Honda BF8/9.9HP
Auto Start Enrichment
On electric start models it automatically adjusts the air/fuel mixture for quick, easy starting and warm-up.

Easy One Hand Starting
Working together, a built-in decompression release and digital CDI system set the ignition timing during start-up. Greatly reduces the effort required to pull-start the engine by hand!

Digital CD Ignition
A reliable microprocessor accurately controls ignition timing during start-up and across the entire RPM range, providing optimum overall operation.

High Output Charging
6 Amps at 1000 RPM and an amazing 12 amps at only 3000 rpm to maintain the battery charge and keep electronics going, even at trolling speeds.

Ultra Low 3 Star Carb Emissions
Cleanest technology available.
BF15/20HP

SPECIFICATIONS
ENGINE - BF15/20 HP
Type: 4-stroke SOHC 2 Cylinders/4 Valves
Displacement: 350 cc (21.4 cubic inches)
Bore & Stroke: 59 mm x 64 mm (2.3 x 2.5 inches)
Full Throttle RPM Range: (BF15) 4,500-5,500 RPM
(BF20) 5,000-6,000 RPM
Rated Power: 15 HP @ 5,000 RPM
20 HP @ 5,500 RPM
Cooling System: Water Cooled
Fuel Delivery: 1 Carburetor
Ignition System: PGM-IG
Starting System: Electric/Recoil
Exhaust: Through Hub
DRIVE
Gear Ratio: 2.08:1
Gear Shift: F-N-R
EQUIPMENT
Alternator (Electric): 12-Amp (151 watt)
Alternator: w/voltage regulator (Manual): 6-Amp (76 watt)
Propeller: 4-Blade Aluminum
Diameter x Pitch (Standard): 9-1/4 X 8 inches
(Powerthrust): (15HP) 10 X 6.5 inches
(20HP) 10 x 7 5/8 inches
Power Tilt Available
Oil Pressure Alert: Standard
Overheat Alert: Standard
Rev-Limiter:
Standard
DIMENSIONS
Overall Width: 345 mm/13.6 inches
Recommended Transom Height  
(S-type) 381 mm/15 inches
(L-type): 507 mm/20 inches
(X-type): 635 mm/25 inches
Dry Weight  
(S-type): 46 kg/101 lbs.
(L-type): 49 kg/108 lbs.
(X-type): 5.15 kg/114 lbs.

BF15/20HP
•  Reverse Exhaust Relief
Additional exhaust relief above the cavitation plate allows the prop to run in clean, exhaust-free water, producing more thrust.

•  Displacement
At 21.4 cubic inches the 15HP has the largest displacement in its class! Along with the long-stroke design, this provides optimum torque throughout the RPM range.

•  Lightweight Design
The 15HP is the lightest four-stroke model in its class, allowing easy transport and convenient mounting to the hull.

•  Easy One Hand Starting
Working together, a built-in decompression release and Digital CDI system set the ignition timing during start-up. Only 60% of the normal effort is required to pull-start the engine by hand!

PGM Ignition
A reliable microprocessor accurately controls ignition timing during start-up and across the entire RPM range, providing optimum overall operation.

•  High Output Charging
Largest alternator in its class! 12 Amps at only 3000 RPM maintain the battery charge and keep electronics going, even at trolling speeds.
BF25/30 HP

SPECIFICATIONS
ENGINE - BF25/30 HP
Type: 4-stroke SOHC 3 Cylinders/6 Valves
Displacement: 499 cc (30.5 cubic inches)
Bore & Stroke: 58 mm x 63 mm (2.3 x 2.5 inches)
Full Throttle RPM Range: (BF25) 5,000-6,000 RPM
(BF30) 5,700-6,200 RPM
Rated Power: 25 HP @ 5,500 RPM
30 HP @ 5,950 RPM
Cooling System: Water Cooled
Fuel Delivery: 3 Carburetors
Ignition System: Capacitor Discharge (CDI)
Starting System: Electric/Recoil
Exhaust: Through Hub
DRIVE
Gear Ratio: 2.08:1
Gear Shift: F-N-R
EQUIPMENT
Alternator (Electric): 10-Amp (126 watt)
Alternator (Manual)
BF25 only:
6-Amp (76 watt)
Propeller: 3-Blade Aluminum
Diameter x Pitch (Standard): 9-1/4 X 12 inches
Power Trim & Tilt Available
Oil Pressure Alert: Standard
Overheat Alert: Standard
Rev-Limiter:
Standard
DIMENSIONS
Overall Width: 375 mm/14.8 inches
Recommended Transom Height  
(S-type) BF25 only: 381 mm/15 inches
(L-type): 507 mm/20 inches
Dry Weight  
(S-type) BF25 only: 67 kg/148 lbs.
(L-type): 69 kg/152 lbs.

BF25/30
3 to 3 Induction
A lightweight, compact 3-cylinder, 3 carburetor design utilizes one carburetor per cylinder. This design is more responsive than competitive throttle bodies with long intake runners.
Benefit
The result - smooth, quiet operation, along with instant throttle response and performance.

CD Ignition
Capacitor discharge ignition is maintenance-free and provides precise timing control and maximum voltage to the spark plugs for dependable operation.

•  Non-linear Mounting System
Patented non-linear rubber mounts provide smoother operation at all engine speeds.

Positive Lubrication
A crankshaft-driven automotive style trochoid oil pump ensures critical engine component long-term durability.

Engine Alert System
Uses visual, audio and RPM reduction circuits to alert the operator of overheating, low oil PSI and over-revving, preventing engine damage.

Power Trim/Tilt
Available on the LRTA model. Allows user to trim the unit for maximum performance and handling.
Trim Degree Range - 0 to 20
Tilt Degree Range - 72

Lightest In It's Class
BF30 model only

Have a question?  Contact the Lynnwood Honda Power Equipment Team at 800-562-1378, or E-mail us for more information.


 


 

 

 


 


 

 


 


 

 


Lynnwood Honda is a Seattle area Honda dealer.


 

Lynnwood Honda
22020 Highway 99.
Edmonds, WA 98026
Phone: 800-463-6813
Email: Contact Us
Fax: 425-672-0500
Parts Phone: (425) 771-3669
Site Map
Mailing Address: P.O. Box 1177
City/State: Edmonds, WA
Zip: 98020-1177